ZTE KIS II V790 Firmware Flash File

ZTE KIS II V790 Firmware Flash File/Stock ROM ZTE KIS II V790

Prerequisites for Installing ROM on ZTE KIS II V790

How To Flash ROM ZTE KIS II V790

  1. Download usb driver and flash file for your ZTE KIS II V790
  2. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  3. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  4. There should be the device called in device management:
  5. Qualcomm HS-USB QDLoader 9008 (COMXX)
  6. In any other case, you have to install drivers manually.
  7. Run QFIL.
  8. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  9. Load XML in Download Section:
  10. First select RawProgram File: rawprogram0.xml
  11. then Select Patch File: patch0.xml
  12. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  13. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait

See detailed Instruction Qualcomm flashing  QPST tool with images

Also, Like:

ZTE Blade L110 sc7731 Firmware Flash File

ZTE Blade L2 Single SIM MT6582 Firmware Flash File

Leave a Reply