ZTE Blade L2 PLUS Andriod 4.4.2 Firmware Flash File

Download

ZTE Blade L2 PLUS Andriod 4.4.2 Firmware Flash File/Stock ROM ZTE Blade L2 PLUS

Initial Steps to Install Firmware on ZTE Blade L2 PLUS

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash ZTE Blade L2 PLUS

1. First, you need to download and install sp flash tool
2. Download and install MTK  Android USB drivers ZTE Blade L2 PLUS
3. Then download Firmware file/Flash file/ROM for your phone
4. Your phone must have 50 % charging before this process
5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
6. Now open SPflash tool.exe
7. When sp flash tool open, go to download button in sp flash tool
8. In download tab, click on scatter load button
9. After locating the scatter tab, click on the download button
10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
11. Now flashing is completed, a green ring will appear in sp flash tool
12. Close sp flash tool on your computer and unplug phone
13. Power on the phone and enjoy
14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing sp tool with imges

Might Also Like:

ZTE Blade V6 MT6735 Android 5.0.2 Firmware Flash File

ZTE Blade L5 MT6572 Firmware Flash File Stock ROM

Download Link

Direct DownloadDownload