Xiaomi Redmi Note 5 Pro Firmware Flash File

Xiaomi Redmi Note 5 Pro Firmware Flash File/Stock ROM Xiaomi Redmi Note 5 Pro

Early steps to Install Stock ROM on Xiaomi Redmi Note 5 Pro

  1.  Download and Install XiaomiMi Flash Tool
  2. Download and install USB Driver for your MI device

How To FlashXiaomi Redmi Note 5 Pro

  1. Download Mi flash tool USB driver, and firmware for your Xiaomi Redmi Note 5 Pro
  2. Open the Setup File to install XiaomiMi Flash Tool on your computer.
  3. Turn Off your Xiaomi Device.
  4. You need to boot your Xiaomi Device into the Download Mode (fastboot mode). To boot into the download mode: Press and Hold Power + Volume Down button for 6-8 seconds.
  5. you have booted into the Download Mode, you will be able to see the following screen on your device
  6. Connect your Xiaomi Device to the Computer using the USB cable.
  7. Click on the Select Button and locate the Firmware Folder.
  8. Click on Flash Button to begin the Flashing Process
  9. Once flashing process is completed, you will be able to see the Success Message in Xiaomi Flash Tool.
  10. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
  11. Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.

See detailed Instruction XiaomiMi Flash Tool with images

Might Also Like

Wiko Lenny 3 Max Stock Firmware Flash File

Samsung Galaxy Note 5 SM-N920G Android6.01 Firmware Flash File

Download Xiaomi Redmi Note 5 Pro Stock Firmware (flash file)

File Name: Xiaomi_Redmi_Note_5_Pro_V9.2.7.0_20180406_7.1.zip
File Size: 2 GB

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *