Wiko Wim Firmware Flash File



Wiko Wim Firmware Flash File/Stock ROM Wiko Wim

Prerequisites for Installing ROM on Wiko Wim

How To Flash ROM Wiko Wim

  1. Download USB driver and flash file for your Wiko Wim
  2. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  3. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  4. There should be the device called in device management:
  5. Qualcomm HS-USB QDLoader 9008 (COMXX)
  6. In any other case, you have to install drivers manually.
  7. Run QFIL.
  8. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  9. Load XML in Download Section:
  10. First select RawProgram File: rawprogram0.xml
  11. then Select Patch File: patch0.xml
  12. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  13. After the flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
  14. Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.

See detailed Instruction Qualcomm flashing  QPST tool with images

Follow Video Tutorial

Might Also Like

iBall Andi 4di Plus Firmware Flash File

Wiko Freddy Android 6.0 Firmware Flash File

File Name: Wiko_Wim_V25_20092017_QFIL.zip
File Size: 2 GB
Download Link

File Name: Wiko_Wim_V30_08082017_QFIL.zip
File Size: 2 GB
Download Link



You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *