Wiko U Feel Prime

Wiko U Feel Prime Android 6.0.1 Firmware Flash File

Wiko U Feel Prime Android 6.0.1 Firmware Flash File/Stock ROM Wiko U Feel Prime

Prerequisites for Installing Rom on Wiko U Feel Prime

How To Flash ROM Wiko U Feel Prime

  1. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  2. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  3. There should be the device called in device management:
  4. Qualcomm HS-USB QDLoader 9008 (COMXX)
  5. In any other case, you have to install drivers manually.
  6. Run QFIL.
  7. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  8. Load XML in Download Section:
  9. First select RawProgram File: rawprogram0.xml
  10. then Select Patch File: patch0.xml
  11. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  12. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait

Also Like:

Wiko Lenny3 MT6580 Firmware Flash File

Wiko Pulp Fab 4G Firmware Flash File Stock ROM

Leave a Reply