Wiko Robby MT6580 Android 6.0 Firmware Flash File

Wiko Robby MT6580 Android 6.0 Firmware Flash File/Stock ROM Wiko Robby

Initial Steps to Install Firmware on Wiko Robby

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Wiko Robby

  1. First, you need to download and install sp flash tool and firmware for your Wiko Robby
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing sp tool with imges

Might Also Like

GFIVE President G6C MT6582 Version 4.2.2 Flash File Firmware

Motorola Moto X XT1562 Android 6.0 Marshmallow Firmware Flash File

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *