Latest
Wiko Pulp Fab 3G

Wiko Pulp Fab 3G Firmware Flash File Stock ROM



Wiko Pulp Fab 3G Firmware Flash File/Stock ROM Wiko Pulp Fab 3G

Initial Steps to Install Firmware on Wiko Pulp Fab 3G

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Wiko Pulp Fab 3G

  1. First, you need to download and install sp flash tool and firmware for your Wiko Pulp Fab 3G
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy

Might Also Like

Wiko Robby MT6580 Android 6.0 Firmware Flash File

Wiko Barry Android 4.2.2 Jellybean Firmware Flash File



Leave a Reply