Wiko Highway Pure 4G

Wiko Highway Pure 4G Android 4.4.4 Firmware Flash File

Wiko Highway Pure 4G Android 4.4.4 Firmware Flash File/stock ROM Wiko Highway Pure 4G

Prerequisites for Installing Rom on Wiko Highway Pure 4G

How To Flash ROM Wiko Highway Pure 4G

  1. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  2. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  3. There should be a device called in device management:
  4. Qualcomm HS-USB QDLoader 9008 (COMXX)
  5. In any other case, you have to install drivers manually.
  6. Run QFIL.
  7. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  8. Load XML in Download Section:
  9. First select RawProgram File: rawprogram0.xml
  10. then Select Patch File: patch0.xml
  11. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  12. After the flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait

Also, Like:

Wiko Highway Star 4G Android 5.1 Firmware Flash File

Tecno Camon CX MT6750 Firmware Flash File

Leave a Reply