Vivo Xshot X710 Firmware Flash File



Vivo Xshot X710 Firmware Flash File/Stock ROM Vivo Xshot X710

Prerequisites for Installing ROM on Vivo Xshot X710

How To Flash ROM Vivo Xshot X710

  1. Download USB driver and flash file for your Vivo Xshot X710
  2. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  3. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  4. There should be the device called in device management:
  5. Qualcomm HS-USB QDLoader 9008 (COMXX)
  6. In any other case, you have to install drivers manually.
  7. Run QFIL.
  8. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  9. Load XML in Download Section:
  10. First select RawProgram File: rawprogram0.xml
  11. then Select Patch File: patch0.xml
  12. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  13. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
  14. Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.

See detailed Instruction Qualcomm flashing  QPST tool with imges

Might Also Like

Vivo E5 MT6575 Firmware Flash File

Vivo S9T MT6577 Firmware Flash File

File Name: Vivo_Xshot_x710_0_PD1302F_A_3.7.3_138512.zip
File Size: 2 Gb



You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *