Swipe Halo Value Plus

Swipe Halo Value Plus Stock Firmware Flash File

Download Swipe Halo Value Plus Stock Firmware Flash File Stock Firmware (Flash File)

Initial Steps to Install Firmware on Swipe Halo Value Plus

  1.  Download and install Rockchip Driver
  2.  Download and extract RockChip Batch Tool

How To Flash Swipe Halo Value Plus

  1. Download and install firmware for your Swipe Halo Value Plus
  2. Open Phoenixsuit upgrade tool, click on the “one-button brush” in the “Browse” Import upgrade software.
  3. Ensure that the Device is Powered Off
  4. Long press the volume key, you can not let go; access PC’s USB.
  5. Note that the Device cannot be diSPlayed at this time there is a charge sign.
  6. Then quickly press the power button for more than 3 times.
  7. Then you can let go with both hands
  8. After a few seconds, the display is shown point “YES” to upgrade.
  9. Upgrade was successful.
  10. After the flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.

Follow Guide for installing Firmware using RockChip Batch Tool

Might Also Like

Swipe 3D Life Plus Stock Firmware Flash File

Swipe Fablet F3 Stock Firmware Flash File

File Name:
File Size: 710 MB
How to Flash: Follow Tutorial

Leave a Reply