Swipe Elite Envy Stock Firmware Flash File
Download Swipe Elite Envy Stock Firmware Flash File Stock Firmware (Flash File)
Prerequisites for Installing ROM on Swipe Elite Envy
How To Flash ROM Swipe Elite Envy
- Download USB driver and flash file for your Swipe Elite Envy
- Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
- Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
- There should be the device called in device management:
- Qualcomm HS-USB QDLoader 9008 (COMXX)
- In any other case, you have to install drivers manually.
- Run QFIL.
- Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
- Load XML in Download Section:
- First select RawProgram File: rawprogram0.xml
- then Select Patch File: patch0.xml
- Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
- Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.
Follow Video Tutorial
Might Also Like
File Name: Swipe_Elite_Envy_MSM8909_20180308_6.0.zip
File Size: 1 GB