QMobile Z8 Firmware Flash File

QMobile Z8 Firmware | flash file + Drivers + Flasher

Prerequisites for Installing Rom on QMobile Z8

  1. Download and install QPST 2.7.422 with QFIL
  2. Download and install Qualcomm USB Drivers.

How To Flash ROM QMobile Z8

  1. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  2. Turn off the phone. Hold Vol+ button and plug-in USB Cable. Phone will vibrate one time, screen wil be black. This is DownloadMode.
  3. There should be device called in device management:
  4. Qualcomm HS-USB QDLoader 9008 (COMXX)

In any other case u have to install drivers manually.


  1. Click Browse… in Programmer Path and choose prog_emmc_firehose_8916.mbn

Load XML in Download Section:

  1. First select RawProgram File: rawprogram0.xml

then Select Patch File: patch0.xml

  1. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  2. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait
  3. See detailed Instruction Qualcomm flashing  QPST tool with imges

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *