Qmobile M6 Lite MT6735T Firmware Flash File

Qmobile M6 Lite MT6735T Firmware Flash File/Stock ROM Qmobile M6 Lite


Initial Steps to Install Firmware on Qmobile M6 Lite

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Qmobile M6 Lite

  1. First, you need to download and install SP flash tool and USB drivers for your Qmobile M6 Lite
  2. Download and install MTK  Android USB driver Qmobile
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool and load sectter file Qmobile M6 Lite
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

Password:  m6litezohaib1122

Might Also Like:

Qmobile E1 MT6735 Firmware Flash File

Blackview R6 MT6737 Firmware Flash File

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *