QMobile i6 Metal HD V2

Qmobile i6 Metal One MT6580 Firmware Flash File

Qmobile i6 Metal One MT6580 Firmware Flash File/Stock ROM Qmobile i6 Metal One



Initial Steps to Install Firmware on Qmobile i6 Metal One

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Qmobile i6 Metal One

  1. First, you need to download and install sp flash tool and usb driver for your Qmobile i6 Metal One
  2. Download and install MTK  Android USB drivers Qmobile i6 Metal One
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing sp tool with imges

Might Also Like

Celkon A10 Android 4.2.2 Firmware Flash File

ZTE Blade Q Android 4.2.2 Firmware Flash File

Leave a Reply