Qmobile A290

Qmobile A290 MT6572 All Version Firmware Flash File

Qmobile A290 MT6572 All Version Firmware Flash File

Initial Steps to Install Firmware on Qmobile A290  

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Qmobile A290

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing sp tool with imges

Might Also Like:

Qmobile A20 MT6589 Firmware Flash File

QMobile X950 MT6572 Android 4.4.4 Firmware Flash File

Other Version Files
MT6572_QMobile A290_4.4.2__ALPS.KK1.MP7.V1
MT6572_QMobile_A290 3G_4.4.2_ALPS.KK1.MP7.V1
MT6572_QMobile_A290_3G_4.4.2_ALPS.KK1.MP7.V1 Bin

Leave a Reply