Obi S400 MT6572 Stock ROM Firmware

Obi S400 MT6572 Stock ROM Firmware/flash file Obi S400

File Name:

Initial Steps to Install Firmware on Obi S400

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Obi S400

  1. First, you need to download and install SP flash tool and USB drivers for your Obi S400
  2. Download and install MTK  Android USB drivers Obi S400
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

Might Also Like:

Verykool S400 Android 4.2.2 Firmware Flash File

Verykool So,l Quatro S5016 KitKat 4.4.2 Firmware Flash File

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *