Micromax V51

Micromax Q438 MT6737M Firmware Flash File

Micromax Q438 MT6737M Firmware Flash File/Stock ROM Micromax Q438

Initial Steps to Install Firmware on Micromax Q438

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Micromax Q438

  1. First, you need to download and install SP flash tool and USB drivers for your Micromax Q438
  2. Download and install MTK  android USB drivers Micromax Q438
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.

See detailed Instruction MT flashing sp tool with images

File Name:
File Size: 1 GB
Download Link

File Name:
File Size: 2 GB
Download Link

File Name:
File Size: 1 GB
Download Link

Leave a Reply