Lenovo Vibe Z2 Pro K920 Android 5.0.2 Lollipop Firmware Flash File



Lenovo Vibe Z2 Pro K920 Android 5.0.2 Lollipop Firmware Flash File/Stock ROM Lenovo Vibe Z2 Pro K920

Prerequisites for Installing ROM on Lenovo Vibe Z2 Pro K920

How To Flash ROM Lenovo Vibe Z2 Pro K920

  1. Download USB driver and flash file for your Lenovo Vibe Z2 Pro K920
  2. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  3. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  4. There should be the device called in device management:
  5. Qualcomm HS-USB QDLoader 9008 (COMXX)
  6. In any other case, you have to install drivers manually.
  7. Run QFIL.
  8. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  9. Load XML in Download Section:
  10. First select RawProgram File: rawprogram0.xml
  11. then Select Patch File: patch0.xml
  12. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  13. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
  14. Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.

See detailed Instruction Qualcomm flashing  QPST tool with imges

Might Also Like

Lenovo Vibe K5 Plus Android 5.1 Firmware Flash File

Lenovo Vibe Z K910 Android4.4.2 Fir5mware Flash File



You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *