Latest
Intex Aqua Trend Lite

Intex Aqua Trend Lite MTK6737 Android 6.0 Firmware Flash File



Intex Aqua Trend Lite MT6737 Android 6.0 Firmware Flash File/Stock ROM Intex Aqua Trend Lite

Initial Steps to Install Firmware on Intex Aqua Trend Lite

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Intex Aqua Trend Lite

  1. First, you need to download and install sp flash tool and usb driver for your Intex Aqua Trend Lite
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

Might Also Like:

Intex Aqua Craze II Android 6.0 Firmware Flash File

Intex Aqua Viturbo Android 5.1 Firmware Flash File



Leave a Reply