iBall Slide Brillante Firmware Flash File



iBall Slide Brillante Firmware Flash File/Stock ROM iBall Slide Brillante

Initial Steps to Install Firmware on iBall Slide Brillante

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash iBall Slide Brillante

  1. Download install SP flash tool, USB drivers, and firmware for your iBall Slide Brillante
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In the download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug a phone
  13. Power on the phone and enjoy
  14. After the flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.

See detailed Instruction MT flashing sp tool with images

Follow Video Tutorial

Might Also Like

Alcatel One Touch 4110E Android 2.3 Gingerbread Firmware Flash File

Philips S308 Firmware Flash File

File Name: iBall_Slide_Brilante_NFSX_X622A_002_L_20150930.zipp
Download Link



You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *