Haier H01 MT6582 Firmware Flash File

Haier H01 MT6582 Firmware Flash File/Stock ROM Haier H01

Initial Steps to Install Firmware on Haier H01 

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Haier H01 

  1. First, you need to download and install SP flash tool and USB drivers for your Haier H01
  2. Download and install MTK  Android USB drivers Haier H01
  3. Then download Firmware file/Flash file/Rom for your phone Haier H01
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on Haier H01 scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

Might Also Like:

Jazz Xplore haier JS300 Firmware Flash File

Haier Pad Mini 782 Android 4.4 Firmware Flash File

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *