Gionee F103 Pro

Gionee F103 Pro Android6.0 Marshmallow Firmware Flash File



Gionee F103 Pro Android6.0 Marshmallow Firmware Flash File/Stock ROM Gionee F103 Pro

Initial Steps to Install Firmware on Gionee F103 Pro

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Gionee F103 Pro

  1. First, you need to download and install sp flash tool and firmware for your Gionee F103 Pro
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. When sp flash tool open, go to download button in sp flash tool
  7. In download tab, click on scatter load button
  8. After locating the scatter tab, click on the download button
  9. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  10. Now flashing is completed, a green ring will appear in sp flash tool
  11. Close sp flash tool on your computer and unplug phone
  12. Power on the phone and enjoy
  13. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing sp tool with imges

Might Also Like

Colors X32 Firmware Flash File

Colors X140 Firmware Flash File

T5730

 T5741

T5907



Leave a Reply