Gionee Elife E7 Android 4.4 Firmware Flash File

Gionee Elife E7 Android 4.4 Firmware Flash File/Stock ROM Gionee Elife E7

Prerequisites for Installing Rom on Gionee Elife E7

How To Flash ROM Gionee Elife E7

  1. Download usb driver and flash file for your Gionee Elife E7
  2. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  3. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  4. There should be the device called in device management:
  5. Qualcomm HS-USB QDLoader 9008 (COMXX)
  6. In any other case, you have to install drivers manually.
  7. Run QFIL.
  8. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  9. Load XML in Download Section:
  10. First select RawProgram File: rawprogram0.xml
  11. then Select Patch File: patch0.xml
  12. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  13. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait

See detailed Instruction Qualcomm flashing  QPST tool with imges

Also Like:

Gionee Pioneer P5L MT6582 Android 5.1.1 Firmware Flash File

Oppo F1s A1601 MT6755 Android 5.1 Firmware Flash File

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *