Coolpad Note 5 3600i Android 6.0 Marshmallow Firmware Flash File



Coolpad Note 5 3600i Android 6.0 Marshmallow Firmware Flash File/Stock ROM Coolpad Note 5 3600i

Prerequisites for Installing ROM on Coolpad Note 5 3600i

How To Flash ROM Coolpad Note 5 3600i

  1. Download USB driver and flash file for your Coolpad Note 5 3600i
  2. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  3. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  4. There should be the device called in device management:
  5. Qualcomm HS-USB QDLoader 9008 (COMXX)
  6. In any other case, you have to install drivers manually.
  7. Run QFIL.
  8. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  9. Load XML in Download Section:
  10. First select RawProgram File: rawprogram0.xml
  11. then Select Patch File: patch0.xml
  12. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  13. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
  14. Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.

See detailed Instruction Qualcomm flashing  QPST tool with images

Might Also Like

Karbonn Titanium Vista 4G MT6737 Firmware Flash File

Micromax Q4251 Android 6.0 Firmware Flash File



You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *