Blackberry Z10 Clone MT6582 Firmware Flash File



Blackberry Z10 Clone MT6582 Firmware Flash File/Stock ROM Blackberry Z10 Clone

MT6582__DENQIN__Z10__Z10__4.4.2__ALPS.KK1.MP1.V2.29

Preloader_z10_zm001.bin

Initial Steps to Install Firmware on Blackberry Z10 Clone

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Blackberry Z10 Clone

  1. First, you need to download and install sp flash tool and firmware for your Blackberry Z10 Clone
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing sp tool with imges

Might Also Like:

Vivo X3S MT6592 Android 4.2.2 Firmware Flash File

Vivo X3S MT6592 Android 4.2.2 Firmware Flash File



You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *