Archos 40c Titanium v2 MT6572 Firmware Flash File

Archos 40c Titanium v2 MT6572 Firmware Flash File

MT6572__archos__ARCHOS 40C TIv2__ac40ctiv2__4.4.2__SW_W97602A18_KK_V11

Initial Steps to Install Firmware on Archos 40c Titanium v2   

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Archos 40c Titanium v2  

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

Might Also Like:

Sico SSD-1-53-13M MT6735 Firmware Flash File

Vsun H9 MT6592 Android4.4.2 Firmware Flash File

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *