Acer Liquid Z410

Acer Liquid Z410 MT6732 Firmware Flash File

Acer Liquid Z410 MT6732 Firmware Flash File/Stock ROM Acer Liquid Z410

Initial Steps to Install Firmware on Acer Liquid Z410

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Acer Liquid Z410

  1. First, you need to download and install sp flash tool and firmware for your Acer Liquid Z410
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

Might Also Like:

Acer T10 MT6580 Android 6.0 Firmware Flash File

Asus ZenFone 5 A501CG Android 4.3 Firmware Flash File

Mobile specification

Leave a Reply